Main Menu
- Welcome to SayIT.
- Log in
It's been a very long time since we've had an In-Win case in house for review. In fact, the last one we checked out was the BUC, an affordable enclosure that was able to hit just the right balance between silence and performance for its price class. The BUC was and remains a reasonable value for end users who want a flexible case and don't mind the slightly gaudy aesthetic, but today we have In-Win's recently launched GRone.
The GRone is poised to be one of In-Win's flagship enclosures, an E-ATX-capable case with a built-in fan controller, attractive if understated LED lighting, five large fans, and a wealth of features even beyond those. Yet it also comes with a substantial asking price of $160, which puts it directly up against some serious competition from vendors like Antec, Corsair, and SilverStone. This is around the price point where we stop making trades between acoustics and thermal performance and start demanding both. Does the GRone fit the bill ?
Rosewill is a familiar name here at AnandTech. It's Newegg's in-house brand, through which they sell products such as notebook accessories, peripheral equipment, cases and power supplies. Their stated goal is to "bring quality hardware and affordable prices together". In most cases they really care about the pricing, but today we will review one of their more expensive high-class offerings. Not long ago we tested their Gold PSUs, which also belong to this classification; the new products go one step further.
The Fortress series from Rosewill has four different versions, all with 80 Plus Platinum certification and non-modular cables. We'll be focusing on the 450W model in this article as this rating is interesting for the largest number of potential buyers. Japanese capacitors and a single 12V output are just two out of many features. Let’s see how the unit performs and whether it is able to surpass their Capstone series.
This Cooler Master cooler is not very expensive, but boasts quite a few interesting technical implementations. Will they be enough to make this cooler look good against the background of the price segment leader ?
We've been having a good run of Mini-ITX cases lately, but most of those cases are designed to still be able to support what are essentially fully-powered systems: standard voltage CPUs, dedicated graphics cards, an optical drive and multiple storage drives. Yet part of the charm of Mini-ITX is that it's capable of fitting into a much smaller space than even a Micro-ATX board theoretically could. If you're gunning just to produce a system that's very small and very efficient, but you don't want to just use someone else's build, a Mini-ITX board and the right enclosure can have you covered.
That's where the Antec ISK 110 VESA comes in. This case is about as small as it gets, and includes the necessary hardware to actually mount it to the back of a monitor. Antec has trimmed about as much fat as you could conceivably hope to trim; there's enough room for a Mini-ITX board, two 2.5" drives, and that's it. It includes an external 90-watt power supply and just enough internal power circuitry to drive low-to-moderate power hardware. With so little room to work in, did Antec make the right decisions, or was there still more they could do ?
We've been looking at a few mini-ITX enclosures as of late, an interest sparked largely by the surprise success of the Bitfenix Prodigy and the general industry tend towards smaller, more powerful systems. As I've mentioned before, the fact is that this is the direction these things are heading in; unless you need something that can handle multiple video cards, you can get a fairly robust system in a smaller form factor. Ivy Bridge knocked power consumption down substantially, and the raw efficiency of NVIDIA's Kepler has allowed for a massive jump in graphics performance (reviews of the GeForce GTX 680M are impending).
Of course, while Bitfenix's Prodigy is a pretty excellent enclosure, it's also remarkably large for a Mini-ITX case. The Cooler Master Elite 120 Advanced we reviewed recently brings things a bit more in line with the form factor, but its cooling performance left a lot to be desired. Meanwhile, in the background, SilverStone has been campaigning for us to take a look at one of its older cases, the Sugo SG05. They're of the opinion that the SG05 is capable of producing stellar performance while being smaller in volume than the competition. This case has been around for a little while, but was it ahead of its time?
Western Digital (WD) introduced hard drives specifically targeted towards NAS systems under the Red branding last month. We had some initial coverage at launch time, where WD claimed a number of firmware features and some additional hardware aspects in the Red lineup that made it suitable for NAS usage.
We took out some Red drives for a spin, first in a standalone setting as a data drive inside a PC, and then, in a variety of SMB / SOHO NAS systems. Read on to find out about the special features in the WD Red disks and how it fares in a typical NAS environment.
HP managed to make the right choices with their 27” ZR2740w monitor, hitting a reasonable price point without sacrificing quality. Now HP has introduced their 2311xi monitor, a 23” IPS display with LED backlighting that is designed with value in mind. Even with their value target, they haven't cut back on features, with multiple inputs and a good amount of adjustments available inside of the display.
With a street price of $200, HP is aiming directly at value priced TN displays that have ruled the low-end of the LCD market for years. We finally might be starting to move to better panels, as the price of IPS continues to come down. Has HP managed to get enough quality into a $200 display that it can convince people to move from TN panels when looking for a value display, or have there been too many sacrifices made in order to hit this aggressive price point ?
Power supply units with midrange wattage remain among the most popular choices these days. Today we are going to talk about half a dozen models from Antec, Chieftec, HIPRO and OCZ Technology.
<div><span style="font-size: small; ">At the risk of sounding foolish, more and more it seems that Mini-ITX is very much becoming the new Micro-ATX. Each subsequent hardware generation crams a little more performance and flexibility into the form factor, and Intel's Z77 chipset complete with USB 3.0 makes it that much easier. With Intel's 8 series chipset rumored to halve the power consumption of Z77 while bumping up the number of USB 3.0 and SATA 6Gbps ports, one has to wonder just how much we'll even need Micro-ATX (let alone ATX) at that point. With all that said, Intel and AMD's advances aren't the only things helping drive forward the adoption of the Mini-ITX form factor.</span></div>
<div><span style="font-size: small; "><br />
</span></div>
<div><span style="font-size: small; "><a href="http://www.anandtech.com/show/6110/cooler-master-elite-120-advanced-case-review-little-in-almost-every-way" target="_blank">Read more...</a></span></div>
Around November of last year we had a chance to take a look at one of the most popular enclosures from up-and-comer Fractal Design, the Define R3. Impressions were good if not absolutely amazing, but it was easy to see how the case had gotten so popular. A competitive price tag, solid acoustics, understated aesthetics, and fairly flexible design all conspired to produce a case that could conceivably be a silver bullet for a lot of users.
Today Fractal Design is launching their next revision of the Define, the R4. It's easy to mistake it for its predecessor, but as is often the case, the devil is in the details. Fractal Design hasn't radically tweaked the formula, but they've rounded some of the edges and added more value to their design without making very many sacrifices in the process. They've done a lot to improve the Define in the R4, but have they done enough ?